具有故障隔离能力的新型MMC子模块及混联桥臂拓扑

PANG Yubin

您当前的位置：

首页 >

文章列表页 >

具有故障隔离能力的新型MMC子模块及混联桥臂拓扑

更新时间：2025-08-13

- 具有故障隔离能力的新型MMC子模块及混联桥臂拓扑
- Automation of Electric Power Systems Vol. 42, Issue 18, Pages: 131-135(2018)
- 作者机构：
  
  中国科学院大学,北京市,101408
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Published：2018
- 稿件说明：
移动端阅览
PANG Yubin. [J]. Automation of electric power systems, 2018, 42(18): 131-135.
DOI：

PANG Yubin. [J]. Automation of electric power systems, 2018, 42(18): 131-135. DOI：

摘要

针对半桥型模块化多电平换流器不具有直流故障阻断能力，柔性直流输电架空线方案存在较高暂态故障率问题，首先提出了一种三电容钳位型双子模块(TCDSM)拓扑。该拓扑与现有钳位双子模块相比，改善了基于钳位双子单元模块柔性直流输电直流侧短路反向电流故障隔离能力。然后，详细介绍了TCDSM拓扑的工作原理和性能分析，并提出了一种新型混联型桥臂换流站方案。新提出的混联型桥臂方案与钳位双子模块和半桥子模块组成的混联型桥臂方案相比，在不牺牲阻断能力的前提下，运行损耗基本相当，初始建站成本更低，从整体上优化了换流站建设成本。最后，通过仿真和实验结果验证了该拓扑及新型混联型桥臂方案的可行性。

Abstract

The half-bridge modular multi-level converter does not have the DC fault blocking capability and the high transient failure rate of the scheme of voltage source converter based high voltage direct current(VSC-HVDC)transmission overhead line. This paper proposes a three-capacitor clamping double sub-module(TCDSM)topology. Compared with the existing clamping double sub-module

the topology improves the isolated current fault isolation capability of the DC-side short-circuit based on the clamping double sub-module VSC-HVDC transmission. The working mechanism and performance analysis of TCDSM topology is introduced in detail

and a new hybrid arm converter scheme is proposed. Compared with the hybrid arm system

which is composed of the clamping double sub-module and the half-bridge module

the cost of new operation is lower than that of the hybrid arm device without sacrificing the blocking capability

optimizing the overall converter station construction costs. Finally

the feasibility of the topology and the new hybrid arm is verified by simulation and experiment.

关键词

Keywords

references

Views

2167

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Fast Protection Scheme for Bipolar Face-to-face Modular Multilevel Converter Based DC Transformer

超级电容储能型MMC多工况电磁暂态等值建模方法

State Space Averaging Modeling Method of Full-bridge Modular Multilevel Converter Considering Dead-time Characteristics

Matrix Dimensionality Reduction for Stability Analysis of Modular Multilevel Converters Under Asymmetric Conditions

Related Author

LU Dongbin

YU Xiang

HUANG Zhiling

LI Haiying

LU Yu

LV Yanbei

LIAO Jianquan

HU Chengbin

Related Institution

State Grid Electric Power Research Institute (NARI Group Corporation)

NR Electric Co., Ltd

College of Electrical Engineering, Sichuan University

State Key Laboratory of Power Transmission Equipment Technology (Chongqing University)

⁰