The penetration of distributed generation system with renewable energy is increasing in the distribution networks and microgrids
which improves the reliability of power supply. However
a large number of sensitive loads accessing to the distribution networks and microgrids also have increasingly strict requirements on the voltage quality. Therefore
the seamless switching of microgrid working states is required when faults occur in the external grids. Aiming at the problems of the existing controllable switching scheme between microgrids and the external grids during the seamless switching procedure
this paper proposes a passive network optimization design method for the controllable switches in the microgrid. It can not only achieve seamless switching of microgrid to island mode when voltage sag occurs
to ensure the reliable operation of sensitive loads
but also provide an effective way to comprehensively solve the power quality problems at the point of common connection of microgrid. The design method of the passive network is determined by mathematical modeling and numerical calculation and validated by electromagnetic transient simulation of typical cases in PSCAD/EMTDC.
Equivalent Projection Based Cooperative Optimal Operation Method for Multi-microgrid Flexible Distribution System
Review of Stability Analysis Methods and Improvement Measures for Power System Dominated by Multiple Virtual Synchronous Generators
Related Author
FANG Yan
LI Jinghua
LAN Fei
XIE Lingling
LAI Yening
FANG Yan
LI Jinghua
LAN Fei
Related Institution
Guangxi Key Laboratory of Power System Optimization and Energy Technology (Guangxi University)
State Grid Electric Power Research Institute (NARI Group Corporation)
Key Laboratory of Guangxi Electric Power System Optimization and Energy-saving Technologys (Guangxi University)
Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology, Ministry of Education (Northeast Electric Power University)
School of Electrical Engineering, Southeast University