Automation of Electric Power SystemsVol. 39, Issue 17, Pages: 68-74(2015)
作者机构:
河海大学可再生能源发电技术教育部工程研究中心,江苏省,南京市,210098
作者简介:
基金信息:
DOI:
CLC:
Published:2015
稿件说明:
移动端阅览
SUN Guoqiang. [J]. Automation of electric power systems, 2015, 39(17): 68-74.
DOI:
SUN Guoqiang. [J]. Automation of electric power systems, 2015, 39(17): 68-74.DOI:
智能用电互动体系构架探讨
摘要
探讨了智能用电互动体系构架的设计原则和设计思路
采用从业务构架到系统构架(数据构架、技术构架)再到集成构架的三步设计方法。首先
结合智能用电互动发展的需求
在原有互动业务体系基础上
进行融合并完善
形成智能用电互动业务构架。然后
建立智能用电互动数据构架和技术构架
实现对业务构架的全面支撑
并对数据构架中各子主题域内容进行具体设计
以及对技术构架中所涉及的关键技术进行分析。最后
建立智能用电互动集成构架
实现数据集成、业务应用集成以及企业外部相关应用集成等。
Abstract
The design principles and ideas of an interactive structural system are discussed. The three-step design approach
from business architecture to system architecture (data and technique) and then to integrated architecture
is adopted. Firstly
the business architecture is developed on the basis of integrating and consummating the original business system by taking into account the demand for the development of interactive smart power utilization. To support the business architecture
data and technology architectures are then proposed. The contents of each subthematic domain in the data architecture are specifically designed
while key technologies involved in the technology architecture are analyzed. Finally
the integrated architecture is established for data
service and enterprise application integration. This work is supported by National Natural Science Foundation of China (No. 51277052
No. 51107032
No. 61104045) and State Grid Corporation of China (GF-K/YD13006-YD).