Automation of Electric Power SystemsVol. 38, Issue 16, Pages: 47-52(2014)
作者机构:
可再生能源发电技术教育部工程研究中心, 河海大学,江苏省,南京市,210098
作者简介:
基金信息:
DOI:
CLC:
Published:2014
稿件说明:
移动端阅览
SUN Guoqiang. [J]. Automation of electric power systems, 2014, 38(16): 47-52.
DOI:
SUN Guoqiang. [J]. Automation of electric power systems, 2014, 38(16): 47-52.DOI:
基于改进多中心-校正内点法的可用输电能力计算
摘要
针对采用预测-校正内点法求解可用输电能力时可能出现的校正方向错误的缺点
提出基于改进多中心-校正内点法的可用输电能力计算方法。该方法保留了多中心-校正内点法的校正步
解决了计算过程中因校正方向错误而产生的迭代发散问题。选择以预测校正方向作为预测步的仿射方向
并通过预设逻辑判断
有选择地对预测校正过程中校正方向进行加权优化
进一步提高了计算的收敛性。通过对IEEE标准测试系统和某省电网实际系统的仿真计算
验证了该算法的可行性。
Abstract
In view of the adverse effect of the corrector in calculating available transfer capability with the predictor-corrector interior point method
an improved multiple-centrality-correction interior point algorithm is proposed for this purpose. The proposed algorithm retains the corrector step of the multiple-centrality-correction interior point algorithm
solving the iteration divergence problem due to the wrong corrector direction. In this algorithm
the predictor-corrector direction is selected as the affine direction for the centrality corrector
and the weighted corrector is selective to be added in the predictor corrector direction during each predictor-corrector step through pre-installed logic
thus further improving the convergence. Simulation results of an IEEE test system and a real power system are provided to verify the feasibility of the algorithm.