low-frequency oscillation research methods based on measurement are more and more attention. Among these methods
the fitting result of prony method is sensitive to noise
and the order of the model is difficult to be selected. The wavelet function is not easy to determine. EMD is a multi-resolution signal-processing method
it can be used non-stationary signals analysis. EMD is more and more used in extraction of the low-frequency oscillation parameters
but it has disadvantages such as model mixing. As more than two individual components in a signal with frequencies within an octave is indecomposable by frequency shift empirical mode decomposition (FS-EMD) method
to improve the frequency resolution and let FS-EMD more general
a refined frequency shift EMD(RFS-EMD) is presented. The proposed method is able to enlarge the component frequency ratios
and to ensure that the frequency does not turn over
so that the complex signal can be decomposed through repeating call this method. In its application to extracting model parameters of low frequency oscillation in power system
this method proves fairly effective in extracting model parameters in a signal with several frequencies within an octave respectively
such as
frequency
amplitude
phase and damping ratio
etc
as shown by numerical simulation and case analysis results.