Firstly, the phenomenon of signal noise frequency band overlapping and the effect of low frequency noise in the direct current optical transducer are analyzed. The direct current optical sensing spectrum shifting measurement method is presented,and the mathematical model of optical modulation and signal demodulation is developed. Secondly, the realization of direct current optical sensing spectrum shifting measurement method is designed. Finally, the error analysis and characteristic test are finished in the direct current optical transducer. The test results show that the proposed measurement system has high accuracy of direct current measurement, and can eliminate the signal noise frequency band overlapping phenomenon. The practicality of the proposed method is thus proven.
Amplitude-Frequency Modulation Characteristics and Demodulation Method of Alternating Electrical Variables in Initial Stage of System Small-disturbance
Phase Differential Protection Scheme of Active Distribution Network Based on Optical Current Transformer
Five-level Selective Harmonic Elimination Method for High-power Parallel Current Source Converter
基于Allan方差的磁光玻璃型光学电流互感器噪声分析
Related Author
YUAN Xiaoming
WANG Sicheng
WU Penghui
YOU Huanhuan
ZHAO Wenchen
WANG Bo
ZHAO Yongsen
LIU Shiming
Related Institution
Hangzhou Power Supply Company of State Grid Zhejiang Electric Power Co., Ltd.
School of Electrical and Electronic Engineering, Huazhong University of Science and Technology
Key Laboratory of Intelligent Power Dispatching and Control of Ministry of Education (Shandong University)
Guangzhou Power Supply Bureau of Guangdong Power Grid Co., Ltd.
School of Electrical and Information Engineering, Tianjin University