The full power back-to-back pulse-width modulation(PWM) converter can be used to connect the permanent magnet synchronous generator(PMSG) with the power grid. The DC-link voltage of the back-to-back PWM converter will excessively fluctuate with the output power change of the generator when the wind speed changes, which has adverse effects on the safe operation of the converter power devices and the generation system. A coordinated control strategy of back-to-back PWM converter for the permanent magnet direct-driven wind turbine is proposed based on the operation characteristics of the PMSG system. The simulation and experimental results indicate the validity of the proposed control strategy. The method can effectively improve the stability of the DC-link voltage of the back-to-back PWM converter, enhancing the safety and stability of the generation system.
Construction Scheme of Voltage-supporting Renewable Energy Station Based on Distributed Synchronous Condensers—Part Two Coordinated Control Strategy and Test Verification
Control Strategy and Capacity Selection of DRU-MMC Hybrid Converters for Offshore Wind Power
Multi-timescale Frequency Regulation Control of Flexible Resources in Virtual Power Plant
Related Author
LIANG Hao
QIN Chuan
XIE Huan
LIANG Beihua
WU Tao
WANG Xuanyuan
WU Long
GAN Huichen
Related Institution
State Grid Jibei Electric Power Research Institute
Power Dispatch and Control Center of State Grid Jibei Electric Power Co., Ltd.
NR Electric Co., Ltd.
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology (South China University of Technology)